Опубликовано gudwin888 в 05/04/2016 - 23:30

Если вместо номера пишется Unknown, тогда необходимо задать номер сим карты с помощью двух команд в консоли Asterisk:
dongle cmd modem1 AT+CPBS=\"ON\"
dongle cmd modem1 AT+CPBW=1,\"+380632223344\",145
Перезагружаем Asterisk и проверяем наличие номера в выводе модемов.
serv*CLI>dongle show devices


Опубликовано x-ops в 05/01/2016 - 21:49

Быстро расшарить текущую папку через http

python -m SimpleHTTPServer


Опубликовано mirage в 03/01/2016 - 17:55

https://community.openvpn.net/openvpn/ticket/442

Configure a multi-homed UDP server. This option can be used when OpenVPN has been con‐
figured to listen on all interfaces, and will attempt to bind client sessions to the
interface on which packets are being received, so that outgoing packets will be sent
out of the same interface. Note that this option is only relevant for UDP servers and
currently is only implemented on Linux.


Опубликовано dragomir в 02/29/2016 - 15:45

0.Настраиваем сеть на прошивке версии 2X

LTP-8X> system
LTP-8X(system)>
LTP-8X(system)> set network ipaddr 10.5.0.184
LTP-8X(system)> set network vlan_management 5
LTP-8X(system)> show network
    Network:
        Hostname:                     'LTP-4X'
        Ipaddr:                       10.5.0.184
        Netmask:                      255.255.255.0
        Vlan management:              5
        Gateway:                      0.0.0.0
LTP-8X(system)> config commit
    Changes successfully commited (1 chunks).
LTP-8X(system)> config save


Опубликовано dragomir в 02/12/2016 - 21:58

copy ftp://username:password@host/tmp/blocklist_url_sce.txt url_list.txt
conf t
interface LineCard 0
sce-url-database clear-all
sce-url-database import cleartext-file url_list.txt flavor-id 290


Опубликовано dragomir в 02/08/2016 - 21:39

$ mkdir /path/to/newfolder
$ for i in *.tar.part*; do files="$files $(readlink -f $i)"; done
$ cd /path/to/newfolder
$ for i in $files; do tar -xvf $i; done


Опубликовано mirage в 02/03/2016 - 23:45

Run the following command in terminal

echo "options rtl8723be fwlps=N ips=N" | sudo tee /etc/modprobe.d/rtl8723be.conf

as this will disable some of the power management of the card and usually helps.

And then you need to reboot or manually reload the driver

sudo modprobe -rv rtl8723be
sudo modprobe -v rtl8723be


Опубликовано dragomir в 02/02/2016 - 19:00

sudo apt-get install python-software-properties
wget http://xaxatyxa.ru/download/add-apt-repository.sh.txt
sudo cp add-apt-repository.sh.txt /usr/sbin/add-apt-repository
sudo chmod o+x /usr/sbin/add-apt-repository
sudo chown root:root /usr/sbin/add-apt-repository

Спасибо http://degibenz.blogspot.ru/2013/04/add-apt-repository-ubuntudebian.html


Опубликовано x-ops в 01/26/2016 - 13:40

SELECT name FROM sqlite_master
WHERE type='table'
ORDER BY name;